power automation PA 8000 - Page 63

Pin Assignment
Pin 1 + 24 V DC power supply for
output byte 1
Pin 2 + 24 V power supply for on-
board logic
Pin 3 0 V
Pin 4 Not used
Pin 5 + 24 V DC power supply for
output byte 2
The 0V connection is common to the different
power supplies that have to be applied on this con-
nector.
The power supply of the output bytes being inde-
pendent from the on-board logic power supply
allows i.e. disconnecting the output byte(s) in case
of emergency stop, setting all of the output bytes to
a safe state.
Property Value Unit
Operating voltage +24 V DC
Tolerances -15 / +12.5 %
Effective range 20.4 - 27.0 V DC
Max. current for the
on-board logic
0.1 A
Max. current for the
output bytes
4 A / byte
Reference Pin 3 (0 V)
Pin Assignment
Technical Data
PA 8000 PAMIO
PAMIO Components
12.01.2017 | 63