Fig. 71: Power Supply Connector
3 Two pin Power Supply Connector
Table 8: The two pin power supply connector has the following pin-
ning:
Pin Description
Pin 1 +24V
Pin 2 0V
Fig. 72: Two pin Power Supply Connector
There is a LED which gives information whether the 24V power is
applied or not.
Fig. 73: Status LED
LED state Module status
ON +24V power supply is applied
OFF +24V power supply is not
applied
Power Supply Connector
Status LED
PA 8000 PAMIO
PAMIO Components
12.01.2017 | 93
To Next Page
Loading...