power automation PA 8000 - Page 95

Pin Assignment
Pin 1 + 24 V DC power supply for
PWM and Fast Output function
Pin 2 + 24 V power supply for on-
board logic
Pin 3 0 V
Pin 4 Not used
Pin 5 Not used
The 0V connection is common to the different
power supplies that have to be applied on this con-
nector.
The power supply of the PWM and Fast output
function is independent from the on-board logic
power supply allows e.g. disconnecting the output
byte in case of emergency stop, making the whole
byte in a safe situation.
Property Value Unit
Operating voltage +24 V DC
Tolerances -15 / +12.5 %
Effective range 20.4 - 27.0 V DC
Max. current for the
on-board logic
0.1 A
Max. current for the
PWM and Fast
output function
4 A / byte
Reference Pin 3 (0 V)
Pin Assignment
Technical Data
PA 8000 PAMIO
PAMIO Components
12.01.2017 | 95