TARGAS-1 Operation Manual V. 1.02 11 support@ppsystems.com
110 Haverhill Rd, Suite 301
Amesbury, MA 01913 USA
Tel: 978-834-0505 Fax: 978-834-0545
Sales: sales@ppsystems.com
Support: support@ppsystems.com
Service: service@ppsystems.com
URL: www.ppsystems.com
Unpacking and Storage of Your Equipment
It is extremely important that you check the contents of your equipment immediately upon receipt to
ensure that your order is complete and that it has arrived safely. Please refer to the packing list to show
all items that are included with your order. DO NOT DISCARD ANY OF THE PACKAGING MATERIAL
UNTIL ALL OF THE ITEMS LISTED ARE ACCOUNTED FOR. WE RECOMMEND THAT YOU RETAIN
THE ORIGINAL PACKING FOR FUTURE USE. If you suspect that any of the items listed on the packing
list are not included or damaged, you must contact PP Systems or your authorized distributor
immediately.
Storage – Transport Case
We highly recommend storing your equipment in a safe, dry location. Every
system is supplied with a custom designed transport case which is ideal for both
transporting and storage of your system. The transport case allows for storage
of:
• TARGAS-1 Console
• PLC5 Leaf Cuvette and Light Unit
• Air Supply Intake Unit
• Extra compartment for spares
Powering up the TARGAS-1 for the First Time
When you first receive your new TARGAS-1 from PP Systems you will need to first connect it up to the
external power supply/charger prior to powering up the instrument. To avoid accidental power up during
shipment we put the instrument into “Ship Mode” (see Ship Mode Settings on page 67 for more
information).
Therefore, when you are ready to begin:
To Next Page
Loading...
Need help?
General
