TARGAS-1 Operation Manual V. 1.02 91 support@ppsystems.com
Appendix 2. Soil CO
2
Efflux and Net Canopy CO
2
Flux on page 150.
Custom Process
This process is available for users that want to use their own custom chambers with the TARGAS-1.
Since it is assumed that you are using your own chambers, there are no “defaults” built into the system. It
is your responsibility to make sure that you enter the appropriate values where required in order to ensure
proper calculations.
Custom – Start Process (Step 1)
The first screen asks the user to confirm that they would like to start the Custom process.
To Next Page
Loading...
