PP Systems TARGAS-1 - Tleaf Setting; Area Setting

TARGAS-1 Operation Manual V. 1.02 51 support@ppsystems.com
TLeaf Setting
TLeaf Setting
Mode Button
Select the leaf temperature measurement method (Energy Balance or Chamber
Temperature)
Back Button
Goes back to Measure Screen 2
Area Setting
Area Setting
Leaf Area Button
Sets the Leaf Area (cm
2
) used in the photosynthesis calculations. (Range 0.5 –
4.50). If the leaf cuvette is filled completely then 4.50 is the proper value.
Back Button
Goes back to Measure Screen 2