TARGAS-1 Operation Manual V. 1.02 47 support@ppsystems.com
Closed or Absolute Mode
Measure Screen 1
The Measure Screen 1 displays the values of 2 parameters in real time.
Indicates the machine is in Closed mode
The Main screen is displayed when this button is selected. See Direct
Link Settings on page 49.
Selects the next measurement screen (Measure Screen 2).
Measure Screen 2
The Measure Screen 2 displays the values of six parameters in real time.
PAR reading from sensor (μmol m
-2
s
-1
)
Sample gas flow ( cc/min)