TARGAS-1 Operation Manual V. 1.02 29 support@ppsystems.com
System Power
The TARGAS-1 has an internal, rechargeable lithium ion battery pack capable of providing continuous
power to the instrument for up to 10 hours. The TARGAS-1 is supplied with an external AC power adapter
to charge and/or power the TARGAS-1.
Battery Specification
• Type: Rechargeable Smart Lithium Ion Battery Pack
• Power: 7.2V, 8.7Ahr, 63Whr
Note, if the TARGAS-1 is used with external sensors/chambers it will reduce the battery life depending on
the probe connected.
A discharged battery (0% capacity) can be fully recharged in approximately 4-5 hours using the power
supply/charger supplied by PP Systems.
To check the battery status, simply power up the instrument and observe the battery capacity next to the
flashing heartbeat in the upper left hand corner of the display (see below).
Power Supply/AC Adapter Rating:
• Input: 100-240 VAC, 50-60 Hz, 1.0A
• Output: 12 VDC, 3.3A
Mains Charger/Power Supply
To Next Page
Loading...
