PP Systems TARGAS-1 - Custom - Other Settings (Step 4)

TARGAS-1 Operation Manual V. 1.02 93 support@ppsystems.com
Custom – Termination Settings Menu
DT Button
Maximum time for which changes in the chamber CO
2
concentration are
monitored in a given session. Valid entries range between 10 - 300 seconds.
DC Button
Maximum change in CO
2
concentration (ppm) allowed in a given session. If
total change exceeds this value the session will end. Valid entries are between
1 - 1,000 ppm.
Delay Button
The amount of time the instrument waits at the start of each session before it
starts calculating respiration. Valid entries are between 5 – 150 seconds.
Stop Button
Stops the Custom process and returns to the Processes Menu.
Right Arrow Button
Continues to the Custom – Other Settings menu (Step 4).
Custom – Other Settings (Step 4)
The plot number is defined and the Air Temperature is entered in this screen.
Custom – Other Settings Menu