TARGAS-1 Operation Manual V. 1.02 67 support@ppsystems.com
Ship Mode Settings
We recommend that you put the instrument into Ship Mode any time you are transporting the instrument
in order to keep the instrument from accidental power up.
To put the TARGAS-1 into a state to prevent the batteries from being used.
Note: After selecting Yes the power switch must be turned off to complete the
action. A new Splash Screen will appear.
Returns to the Settings 4 Menu with no changes.
Turn the power switch to the off position. Once the power is off it advances to the next screen, which will
remain until the system is powered up using the external power supply/charger supplied by PP Systems.
To Next Page
Loading...
Need help?
General
