TARGAS-1 Operation Manual V. 1.02 146 support@ppsystems.com
Battery
The internal, rechargeable Li-Ion battery pack should last for many years. When fully charged it should
allow continuous operation of the instrument up to 10 hours. We recommend that you always fully
recharge the battery after use. If the instrument is stored for longer periods, ensure that the battery is fully
charged prior to storage.
Pumps
There are 2 pumps used in the TARGAS-1 and both are rotary vane style pumps. One is used as a
sampling pump and one as a forwarding pump. They are secured in place by a simple mounting clip and
electrically connected to the internal PCB. Both operate from 1.0 – 5.0 VDC, which is generated by the
TARGAS-1 controller board. They are capable of delivering flow rates up to 500 cc/min flow. History has
shown that these types of pump are rugged and durable and should last for many years. If replacement is
necessary, please contact PP Systems.
Infrared Source
The infrared source should last for many years without replacement. Please contact PP Systems for
more information if you suspect a faulty Infrared source.
To Next Page
Loading...
Need help?
General
