CAUTION: You have approximately 3 seconds before the treadmill running belt
begins to move after pressing Quick Start. Ensure you are in the proper position.
WARNING:Press the safety stop key if the towel becomes loose to prevent it from
being pulled into the treadmill’s rollers.
4. The treadmill will begin to run at 1 mph. Allow the treadmill to run for one minute while
keeping the towel firmly in place.
WARNING:Do not adjust the treadmill’s speed or run it higher than 1 mph.
5. After one minute, stop the treadmill by pressing the STOP button.
6. When the belt has fully stopped moving, remove the STOP key tether, exit the treadmill,
and turn the power switch to OFF.
Experience Series 700 Line Treadmills
157
7 Preventative Maintenance
Running Belt and Deck Cleaning Procedure
To Next Page
Loading...
Need help?
General