Belt and Deck Replacement Procedure
About
This procedure provides instruction to remove and replace the Running Belt and Deck.
Procedure
Review entire procedure before starting.
Removal Instructions
1. Switch the power OFF and unplug
1
the power cord.
2. Remove the hood cover, see "Covers and Panels Replacement" on pageî54, and
left/right Trim Landing covers, see "Covers and Panels Replacement" on pageî54.
1
Disconnect a device power cord plug or cable connector from the power receptacle or outlet.
Experience Series 700 Line Treadmills
116
5 Replacement Procedures
Belt and Deck Replacement Procedure
To Next Page
Loading...
Need help?
General