CONSOLE KEY FUNCTION/DESCRIPTION
OK Selects the current menu item or confirms settings.
BACK/CLEAR
• Returns to the previous menu level without saving changes.
• Hold Back to exit the Display test.
PAUSE • Exits service mode
• Press and hold PAUSE for greater than 6 sec will open the Error
Log or show the "Stuck Key" message when there are no logged
errors.
P80 and P82 Series Consoles
:
The P80 and P82 consoles use the touchscreen softkeys to select items and navigate the ser-
vice software and diagnostic test menus.
Follow the on-screen prompts run the diagnostic tests.
CONSOLE KEY FUNCTION/DESCRIPTION
Softkey controls Use your finger to touch the on-screen softkey controls (OK.
START, STOP, BACK, etc.) or menu item to select.
Scroll Up/Dwn Use your finger to select while swiping your finger Up/Dwn to scroll
through menu items. Some menus provide a scroll bar on the
screen right side to scroll Up/Dwn.
BACK softkey
• Use the touchscreen BACK softkey to return to the previous menu dis-
play.
• Continue selecting the BACK softkey to exit the service software.
PAUSE hardkey Stop a running diagnostic test.
P62 Series Consoles
The P62 console uses a combination of touchscreen softkeys and keypad hardkeys to select
and navigate thru the service software programs. The P62 uses the BACK hardkey to return
to the previous menu and the PAUSE hardkey to stop a runing diagnostic test.
Follow the on-screen prompts run the diagnostic tests.
CONSOLE KEY FUNCTION/DESCRIPTION
Softkey controls Use your finger to touch the on-screen softkey controls (OK. START,
Experience Series 700 Line Treadmills
20
3 Standard Service Modes
P62 Series Consoles
To Next Page
Loading...
Need help?
General