CLUB PARAMETER DESCRIPTION
SET CUSTOM
PROGRAM 1/2
Sets the use of a customized workout program.
Range: ON/OFF
Default: OFF
Note: The Total Body Workout can only be turned on in this Club
Settings menu.
Note:* not available on all models.
P62, P80, and P82 Series Console
P62, P80, and P82 Series Consoles
The P62, P80, and P82 Club Settings information is accessed thru three submenus:About
(information about the machine), Equipment Usage (the usage stats), and the System Set-
tings (user defined workout limit configuration parameters):
l "About menu" below:General information about the machine (serial number, name,
type, location, software versions, internet/Wi-Fi connectivity) and the event and error
codes (EventLog and CPA
1
Event Log).
l "Equipment Usage menu" on the facing page:Machine workout usage information
(total workout time & distance, last work start/stop times).
l "System Settings menu" on page28: Provides the user defined club configuration and
setup parameters for Connectivity (internet/Wi-Fi), Display settings, TV settings,
Workout Limits settings, and Manage settings (save, import/export system settings).
l "Maintenance menu" on page31: Provides machine ASLstatus and running belt
required maintenance status and reminder information.
About menu
menu: Club Settings (5,6,5,1,5,6,5) > About
Information about the machine hardware and software and the event and error codes.
ABOUT PARAMETER DESCRIPTION
CPA Event Log menu: About > CPA Event Log
The CPA Event Log contains all console and base error diagnostic
messages and error codes including network connectivity inform-
ation, OEM test codes, and maintenance error codes.
.Note: Use the CPA Event Log and not the CPA Event Log to find
the machine maintenance error event codes. The CPA Event Log
only contains maintenance error codes.
CPA Event Log menu: About > CPA Event Log
1
Control Processing Assembly
Experience Series 700 Line Treadmills
26
3 Standard Service Modes
Club Settings Service mode (5651565)
To Next Page
Loading...
Need help?
General