Precor TRM700-16 Base - Page 32

CLUB PARAMETER DESCRIPTION
SAFETY CODE
Enabled or disabled. When enabled, a user password (xxxx) is
required o use the machine.
Factory default: disabled.
SELECT LANGUAGE
Sets the default language for all workouts on this machine. Lan-
guage for single use workouts can also be set by the user from the
workout options.
Default:English
SET UNITS Sets units of measure to US standard or Metric.
Range: U.S, Metric
Default: U.S.
SET MAX WORKOUT
TIME
Sets the maximum allowable user workout time per session.
Range: 1 to 240 min, NO LIMIT
Default: 60 min
SET MAX PAUSE
TIME
Sets how long the equipment remains in a paused banner during a
workout before resetting.
Range: 1 to 120 sec
Default: 120 sec
SET COOL DOWN
TIME
Sets the amount of time that a cool down period will occur at the
end of every workout. Factory default is 5 minutes. Settable in 1
minute increments.
Range:1 to 5 min
Default: 5 min
SET METRICS
DEFAULT
Sets a metric that may be of specific importance to the specific
facility or fitness trainer. The selected metric will scroll across the
screen at regular intervals during the workout.
Default: none
SET SPEED LIMIT Sets the user maximum speed.
Default: 12 mph
SET INCLINE LIMIT Sets the user maximum speed.
Default: 15 %
HIDDEN PROGRAMS Either enabled or disabled*, the setting allows the unit to access
specialized fitness tests designed for police, fire fighters and the
military.
Default: disabled
REMOTE SPEED
CONTROL
Not used.
AUTO STOP
CONFIGURE
Sets Auto Stop to On or Off.
Default: ON
MAINT CONFIG (ASL only) Sets the ASL maintenance counter reminder function
ON/OFF (ASL pulsing blue light ON/OFF).
Experience Series 700 Line Treadmills
25
3 Standard Service Modes
Club Settings Service mode (5651565)