ABOUT PARAMETER DESCRIPTION
The CPA Event Log only contains the machine maintenance error
event codes, see "
Error Troubleshooting Guide
" for error code
description and troubleshooting information.
.Note: Use the CPA Event Log and not the CPA Event Log to find
the machine maintenance error event codes.
Console Serial Num-
ber
menu: About > Serial Number
User assigned machine name.
Lower Serial Number menu: About > Serial Number
User assigned machine name.
Friendly Name menu: About > Friendly Name
User assigned machine name.
Location menu: About > Location
Facility location code.
Console Serial Num-
ber
menu: About > Console Serial Number
Console serial number.
Release Bundle Ver-
sion
menu: About > Release Bundle Version
Provides console and base software version numbers: CPA Soft-
ware, LPCA, Qt App, Boot Kernel, File System.
ETag Check Interval menu: About > ETag Check Interval
OEM use only
Heartbeat Interval menu: About > Heartbeat Interval
OEM use only
Wired MAC Address menu: About > Wired MAC Address
Wired LAN MAC address
WI-FI MAC Address menu: About > Wi-Fi MAC Address
Wireless Wi-Fi MAC address
Network Time Server1 menu: About > Network Time Server1
NTP
1
server address
Machine Type menu: About > Machine Type
Specifies the detected machine type: TRED, AMT, EFX.
Equipment Usage menu
menu: Club Settings (5,6,5,1,5,6,5) > Equipment Usage
Information about the usage of the machine.
1
Network Time Protocol (NTP) is a networking protocol for clock synchronization between
computer systems over packet-switched, variable-latency data networks.
Experience Series 700 Line Treadmills
27
3 Standard Service Modes
Club Settings Service mode (5651565)
To Next Page
Loading...
