Operational Tests
1. Select a Manual program and operate the treadmill at least 5 minutes. While walking on
the unit perform the following tests:
2. Operate the SPEED and INCLINE controls from minimum to maximum ranges while
verifying the operation.
l Make sure that the operation is smooth and that there are no unusual noises.
l Also verify that the console parameter indicators and user interface displays are
showing correct information.
3. While walking on the treadmill, press the STOP button and verify that the running belt
slows to a stop.
4. While walking on the treadmill, pull the ESTOP lanyard and make sure the running belt
slows to a stop.
Tracking Test
1. Step off the treadmill and operate the treadmill at 12 mph (19 kph) for one minute. Verify
that the running belt remains centered, see "Running belt tracking adjustment" on
page43.
Return to service
1. Switch the power OFF.
2. Make sure that the treadmill is setting level and stable, adjust the two rear leveling feet
as necessary.
3. On successful completion of these tests, return the treadmill to service.
Experience Series 700 Line Treadmills
16
2 Operation Verification
Operation Verification Tests.
To Next Page
Loading...
Need help?
General