Profitec MOVE - Inserting the Portafilter in the Brew Group

EN - 101MOVE_BA_V1.0
9.7 Inserting the portalter in the brew group
NOTICE
Damage due to overtightening of the portalter
When inserting the portalter, the portalter or machine may become
damaged if overtightened.
• Carefully tighten the portalter.
• Only tighten the portalter until you can feel some resistance. Do not
turn it too much.
It is recommended to leave the portalter clamped in the brew group so that
it does not cool down. If the portalter becomes too cold, it can be warmed up
with a ush. Do not ll the portalter with ground coffee when doing this.
Fig.7 Portalter installed, handle pointing to the front