Profitec MOVE - Steam Enable; Steam Temp

EN - 111MOVE_BA_V1.0
1. Open the main menu.
2. Select and open the “Brew Temperature” submenu.
¾ The currently set brew temperature ashes on the display.
3. Set the brew temperature.
9 The set brew temperature appears on the display for a few seconds.
10.3.2 Steam Enable
Liquids can be heated and foamed using the steam nozzle of the machine.
Water is heated in the steam boiler for this purpose. To save energy, the steam
boiler can be switched off. The steam boiler is activated (“ON”) by default.
Activation or deactivation takes place via the shortcut function (see Chapter
9.3, “Shortcut functions”) or as follows via the menu:
1. Open the main menu.
2. Select and open the “Steam Enable” submenu.
3. Select the setting “ON” (activate steam boiler) or “OFF” (deactivate
steam boiler).
10.3.3 Steam Temp
Hot steam is drawn via the steam nozzle to heat or foam liquids. The
temperature of the steam can be set via the menu. By default, the steam
temperature is set to 128°C. It can be set to any value between 115°C and 134°C.
1. Open the main menu.
2. Select and open the “Steam Temperature” submenu.
3. Set and conrm the desired temperature.