EasyManua.ls Logo

Profitec MOVE - Cleaning the Water Tank; Emptying the Steam Boiler; Orientation of the Water Tank

Profitec MOVE
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN - 125MOVE_BA_V1.0
11.5 Cleaning the water tank
11.5.1 Orientation of the water tank
Fig.10 Orientation of the water tank
1 Float with magnetic point 2 Valve
Orient the water tank so that
the oat is inserted with the magnetic point facing up, and
the valve is at the bottom right of the tank.
Only when the water tank is correctly oriented can it be inserted in the housing
so that the edges of the tank lie completely on the housing.
11.5.2 Cleaning the water tank
Clean the water tank daily. Do not put the water tank in the dishwasher. To
clean the water tank, proceed as follows:
1. Remove the water tank lid from the top of the machine.
2. Pull out the water tank upwards using both hands.
3. Empty the water tank over a sink and clean with warm water, a food-
safe washing-up liquid, and a soft cloth.
4. Dry the outside of the water tank using a dry, soft cloth.
5. Insert the water tank.
6. Place the water tank lid back on.
11.6 Emptying the steam boiler
If the machine is not going to be used for a relatively long stretch of time, it
should be emptied. Even with frequent use, the boiler water should be emptied
every 1-2 weeks and replenished.
2
1

Table of Contents

Related product manuals