M350 Series User Manual 100
2. Navigate to the Authentication IDs tab.
3. Add the authentication ID
Keep ID as blank, Type as PSK and fill the password to Pre-shared Key field.
4. Apply the changes
5. Navigate to the Connections tab.
6. Add IPsec connection
(1) Edit the phase 1 setting
(2) Change Mode from Disable to Enable.
(3) Save the changes.
(4) Edit the phase 2 setting
(5) Fill up the Local Subnet and Remote Subnet.
e.g. Local Subnet: 192.168.100.0/24, Remote Subnet: 192.168.200.0/24
(6) Save the changes
7. Apply the changes
To Next Page
Loading...
