Icon/symbol/
designation
Meaning
Special tools are required. This icon is followed
by a list of special tools that are required to carry
out the task. (Normal tools, i.e. conventional tools
or tools carried in the vehicle, are not listed spe‐
cially.)
This icon is followed by an indication of required
maintenance work.
This indicates a tip, helpful note or additional in‐
formation regarding machine maintenance, envi‐
ronmental protection, etc.
1.2.1 Layout of warning notices
WARNING
Type and cause of risk
Consequences of not observing the risk.
▶
What to do in order to provide a remedy or avoid the risk.
Signal words
The signal word is selected in accordance with the ANSI Z535.6:2011
safety standard.
The following signal words are used:
DANGER
Indicates a dangerous situation in which an accident resulting in se‐
rious injuries and/or death may occur. Highest level of risk.
▶
After identifying the risk, instructions are set out which are inten‐
ded to avoid or remedy the risk.
Guide to the Operating Instructions
1 — 4
To Next Page
