WARNING
Risk of crushing due to lifting and loading the machine
▶
Lift the machine carefully with a forklift truck and move it with
great care.
▶
When lifting with the crane, determine the centre of gravity of
the machine by lifting it carefully. All cables or chains on the lift‐
ing gear must be tensioned evenly and the machine must be
raised evenly at all support points.
▶
Load the machine on a suitable transport vehicle.
▶
Secure the machine to prevent it from rolling away, slipping and
toppling over during transport.
WARNING
Risk of death or injury from falling loads
Hoisted loads may fall if they are not loaded properly or if the auxili‐
ary loading equipment is damaged.
▶
Use only undamaged auxiliary loading equipment designed for
the gross weight of the machine.
▶
Do not walk under suspended loads.
2.11.3 Assembly of the auger pump
There is a risk of crushing when mounting the auger pump.
WARNING
Risk of crushing due to turning of the auger pump
Depending on the mounting position of the stator or screw conveyor
barrel, it can turn all the way to the stop when the machine is
switched on.
▶
Secure the machine against unauthorised or accidental starting.
▶
Never reach into the auger pump while switching the machine
on.
▶
For screw conveyor barrels with a stop, this must be secured at
the stop of the mixing pipe.
Safety regulations
2 — 15
To Next Page
