Observe the following basic principles:
● Safety equipment must not be removed, decommissioned or other‐
wise modified.
● Safety equipment removed for maintenance work must be fitted
again as soon as work is complete.
● Following assembly, the safety equipment must be checked to en‐
sure it is fully functional.
Check operational safety every time you start work. Any defects
found or suspected must be eliminated immediately. If necessary, in‐
form the project supervisor.
If defects or faults are found or suspected during operation, operation
must cease immediately. Rectify the defects or faults before restarting
the machine.
2.2.1 Onwards sale
Observe the following for an onwards sale of the machine:
Pass on all accompanying documentation (operating and mainte‐
nance instructions, plans, inspection certificates, etc.) you received
with your machine to the new operator. If necessary, you must re-or‐
der the papers from us, citing the machine number. The machine
must not be sold on without the accompanying documentation under
any circumstances.
Notifying the manufacturer of the onwards sale/purchase ensures that
you will also receive support from the manufacturer as well as any in‐
formation on safety-relevant changes.
2.3 Designated use
The machine is designed in accordance with current engineering
standards and recognised safety rules. However, its use may still
present a risk of machine operators or third parties suffering death or
injury, or the machine and other property becoming damaged.
The machine may only be used as designated in the Operating In‐
structions and the accompanying documentation. All notes and safety
regulations in the Operating Instructions must be observed.
The machine is exclusively designed for mixing, conveying and spray‐
ing premixed dry mortar. Never use it for any other materials or me‐
dia.
Safety regulations
2 — 4
To Next Page
