Please ensure that you check the requirements for connection to the
water supply before beginning connection work:
● The line must be at least 3/4" in diameter.
● The available water pressure must be at least 4 bar.
Item Designation
1 Water connection
▶
Connect the water supply line from the water network to the water
connection.
Water supply lines must be laid neatly, taking local conditions into
consideration, and safeguarded against damage. They must not
impede the operating personnel.
4.9 Electrical connection
The electrical connection must be made on the basis of the electrical
circuit diagram supplied. The electrical circuit diagram can be found in
the machine spare parts list.
You can find the electrical connected loads in the electrical circuit dia‐
gram and on the machine rating plate.
The following requirements for the mains connection must be fulfilled
by the operating company:
Transport, setting up and connection
4 — 18
To Next Page
Loading...
