Symbol Meaning
Safety harness
When working at heights, use climbing aids
and platforms that are intended for this pur‐
pose and comply with the safety regulations
or wear a safety harness. Relevant national
regulations must be observed.
(DIN EN 361:2002; Personal protective equip‐
ment against falls from a height - Full body
harnesses; category III)
Respiratory protection and face mask
Respiratory protection and face masks pro‐
tect you from particles of building materials
that may enter your body through the respira‐
tory passages (e.g. concrete admixtures).
(DIN EN 149:2009; Respiratory protection de‐
vices - Filtering half masks to protect against
particles - Requirements, testing, marking;
classification FFP1)
2.10 Risk of injury, residual risks
The machine is designed in accordance with current engineering
standards and recognised safety rules. However, its use may still
present a risk of machine operators or third parties suffering death or
injury, or the machine and other property becoming damaged.
Some of the injuries that may be caused by improper use of the ma‐
chine are listed below:
● Risk of crushing and impact when moving and setting up the ma‐
chine.
● Electrical contact (possibly with fatal consequences) with the elec‐
trical equipment, if the connection has not been made properly or
electrical assemblies are damaged.
● Injuries through unauthorised start up or use of the machine.
● Noise exposure, if persons without hearing protectors are perma‐
nently in the vicinity of the machine.
Safety regulations
2 — 13
To Next Page
