WARNING
Risk of injury due to defective safety equipment
Defective safety equipment may appear safe even though it is not.
This can lead to the machine continuing to run or not switching off
quickly enough in the event of an impending danger.
▶
Always check the function of the safety equipment before the
start of work
▶
If a safety device does not respond during the check, the ma‐
chine must not be started up.
▶
Eliminate the fault.
Check:
1. The function of the EMERGENCY STOP button (option),
2. Whether the mixer drum grille is fitted and securely locked,
3. Whether the tilt switch in the gear motor switches off if the mixing
pipe begins to swivel away.
5.4.2 Checking the EMERGENCY STOP button
Before using the machine, you must check the function of the EMER‐
GENCY STOP button.
NOTICE
Machine damage caused by incorrect actuation of the EMERGEN‐
CY STOP button
▶
Only press the EMERGENCY STOP button in the event of dan‐
ger.
▶
Do not use the EMERGENCY STOP button to switch off the
machine.
Starting up
5 — 11
To Next Page
Loading...
