7 Faults, cause and remedy
This chapter gives you an overview of faults and their possible cau‐
ses, and also ways in which you may rectify them. Observe the safety
regulations when troubleshooting.
Inspection and maintenance personnel must have authorisation and
the necessary technical qualification. They must have completed
training relevant to working with the equipment on the machine and
be conversant with the content of the operating instructions.
If you cannot rectify the fault yourself, contact the relevant Service de‐
partment at the manufacturer or a dealer authorised by the manufac‐
turer.
Use only original spare parts. The manufacturer accepts no liability
for damage caused by the use of nonoriginal spare parts.
7 — 1
To Next Page
