8.3 Residual risks during maintenance work
Maintenance work may present a risk of personnel or third parties
suffering injury or death.
8.3.1 Personnel requirements
Only qualified personnel may carry out maintenance work. Qualified
personnel must have successfully completed a specialist training
course that qualifies them to carry out such activities.
If you do not have qualified personnel for carrying out maintenance
work, you should commission the manufacturer's After Sales depart‐
ment with the maintenance of your machine.
Have the first After Sales service carried out by a service technician
of the manufacturer or a dealer authorised by the manufacturer.
8.3.2 Personal protective equipment
See the ““Safety regulations”” chapter for personal protective equip‐
ment requirements.
WARNING
Risk of injury due to not wearing personal protective equipment
▶
Always wear your personal protective equipment during mainte‐
nance work.
8.3.3 Residual risks
There are specific risks of accidents associated with maintenance
work, as protective devices must be removed to perform certain activ‐
ities. There follows a list of residual risks, which may be present dur‐
ing maintenance, inspection and repair work.
DANGER
Risk of death due to fatal electric shock
▶
Work on the electrical system may only be carried out by certi‐
fied, licensed and qualified electricians (proof of qualification in
line with EN 60204, part 1, page 14, item 2.21).
Maintenance
8 — 4
To Next Page
Loading...
