NOTICE
Environmental pollution caused by incorrect disposal of functional
fluids
▶
Collect all functional fluids, e.g. used oil, filters and auxiliary ma‐
terials, separately.
▶
Dispose of these in line with the relevant national and regional
regulations.
▶
Only work with waste disposal companies who are approved by
the responsible authorities. Ensure that different oils are never
mixed.
8.4.1 Gear motor
The gear motor is filled with 0.8 l of CLP ISO VG 220 lubricating fluid
in the works. This must be replaced every 10,000 hours or every 3
years at the latest.
The agitator gearbox is lubricated for life and filled with 210 g of Shell
Alvania R
A
lubricating fluid in the works. This must be replaced every
20,000 hours or every 5 years at the latest.
8.4.1.1 Gearbox oil
NOTICE
Risk of machine damage due to incorrect gearbox oil
▶
Only use a gearbox oil in accordance with the requirements
standard specified in the lubricant recommendation for topping
up or performing a full oil change. Observe the manufacturer’s
information in doing so.
▶
Do not mix the specified oil with other oils.
If the machine is used at other ambient temperatures, the required oil
grade must be requested separately. A full oil change should only be
carried out when the machine is warm after operation.
8.4.2 Compressor
The motor bearings are lubricated for life in the works.
Maintenance
8 — 6
To Next Page
