Align the mixer shaft retainer on the mixer motor and the mixer
shaft.
11. Close the turnbuckle to secure the mixer motor.
8.6.7 Adjusting the auger pump
This section describes how to adjust the auger pump. Observe the
specifications in the “Maintenance intervals” section.
(Maintenance in‐
tervals P. 8 — 2)
The following special tools are required:
● Putzmeister test pressure gauge, part no. 208745.002
The performance of the auger pump is checked by means of water
pressure with the machine running.
Maintenance
8 — 20
To Next Page
