PCX SMS AND PCX 256 SYSTEM MANUAL
Page: 20 RINS871-3
Functions/Parameters Default Setting
ATE Pin 9 Global Fault 1 Global Fault 2
ATE Pin 10 Test ATS Test ATS
RIX PGMs All Not Used All Not Used
ROX Module PGMs All Not Used All Not Used
Keypad PGMs All Not Used All Not Used
Reader PGMs All Not Used All Not Used
INTELLIGENT ARM
PCX 26/SMS PCX 256
Intelligent No No
SITE OPTIONS
PCX 26/SMS PCX 256
Arm With Fault No Yes
Arm With Tamper+ No No
Arm With ATS Flt Yes Yes
Arm Part TFault - Yes
Arm Fail = Alarm No No
Do Battery Load Test No No
Part Misoperate No No
Strobe Confirm No No
Re-Arm Omits No No
Use Level Arm - No
Confirmed When Final Arm Final Arm
Autoset Force - No
Restrict PIN Use No Yes
Invert ATE O/Ps Yes Yes
Common Exit Mode - Yes
Flexi Unset No No
2 Key HU None None
ATE Inputs None None
ENGINEER RESTORE OPTIONS?
PCX 26/SMS PCX 256
Engineer Restore Intruder No No
Engineer Restore HU No No
Engineer Restore Tamper No Yes
Engineer Restore Soak No No
Engineer Restore Confirmed No Yes
Engineer Restore Faults No Yes
Anti-code Restore No Yes
ENGINEER TESTS?
PCX 26/SMS PCX 256
Sound To play - No Sound
SET UP DOWNLOADING?
PCX 26/SMS PCX 256
Download by None None
(modem) Security Mode Auto-Answer Auto-Answer
Telephone Line Dedicated Dedicated
Number of Rings to Prime - 03
Modem Speed High High
Arm Tel No Blank Blank
Modem Tel No Blank Blank
Signal Alarms - No
Signal Faults - No
Signal Open/Close - No
Signal Access C - No
PROGRAMME DIGI/SMS?
PCX 26/SMS PCX 256
Disable Digi/SMS Yes Yes
Active No No
Choose Format Fast 4.8.1 Fast 4.8.1
To Next Page
Loading...
