Pyronix 256 - Page 89

PCX SMS AND PCX 256 SYSTEM MANUAL
RINS871-3 Page: 89
Visual Keypad Programming Procedure
ENGINEER TESTS
Engineer Tests
Using the mand Pkeys, scroll to ‘ENGINEER
TESTS?’ Press the Okey
Sound To Play
Press the pkey to select which sound you would
like to hear. Press the Okey.
This is not available in PCX 26/SMS.
Walk Test
Press the Okey to enter Walk Test.
Select the partitions to be tested. Press the Okey
The display will scroll through all the inputs not yet
tested. Walk test each input. As each input is
triggered, a chime will sound and that input will
disappear from the scrolling list. Press the Okey
Once the last remaining input has been tested, the
following screen appears. Press the Okey. ‘Walk
Test’ will be display, press the P key.
Test Control?
To enter the Test Control press the Okey