Pyronix Matrix 832 Installation Guide

! Matrix 832 / 832+ / 424
RINS428-5 Page 45
Enter BTW followed by zone number from [01 - 32].
The zone type for Arm A will then be displayed
Use
> or ? buttons to choose a zone type. Press B to accept and save the new zone type.
The zone type for Arm B will then be displayed
Use
> or ? buttons to choose a zone type. Press B to accept and save the new zone type.
The zone type for Arm C will then be displayed
Use
> or ? buttons to choose a zone type. Press B to accept and save the new zone type.
The zone type for Arm D will then be displayed
Use
> or ? buttons to choose a zone type. Press B to accept and save the new zone type.
The attributes for Arm A will now be displayed
To select an option use the
> and ? buttons. To change an option press the C button. To save the
changes press
B. An acceptance tone will be played.
Option Option Off = Alarm LED Off Option On = Alarm LED On Default
1 Chime Disabled Chime Enabled Off
2 Test Disabled Test Enabled Off
3 Mask Disabled Mask Enabled Off
4 Double Knock Disabled Double Knock Enabled Off
5 Normally Closed Normally Open Off

Pyronix Matrix 832 Specifications

General

Brand	Pyronix
Model	Matrix 832
Category	Control Panel
Language	English