9 – Device Security Configuration
Managing Groups
9-12 59183-02 A
S
9.6
Managing Groups
Managing Groups consists of the following tasks:
îš„ Create a Group
îš„ Delete a Group
îš„ Rename a Group
îš„ Copy a Group
îš„ Add Members to a Group
îš„ Modify a Group Member
îš„ Remove Members from a Group
All of these tasks require an Admin session and a Security Edit session.
9.6.1
Create a Group
Creating a group involves specifying a group name and a group type. There are
three types of groups:
 ISL group–secures connected switches
 Port group–secures connected devices
 MS group–secures management server commands
Enter the Group Create command to create a new port group as shown in the
following example:
SANbox (admin-security) #> group create group_port port
9.6.2
Delete a Group
Enter the Group Delete command to delete group_port from the security database
as shown in the following example:
SANbox (admin-security) #> group delete group_port
9.6.3
Rename a Group
Enter the Group Rename command to rename group_port to port_1 as shown in
the following example:
SANbox (admin-security) #> group rename group_port port_1
To Next Page
Loading...
Need help?
General
