12 – Call Home Configuration
Testing a Call Home Profile
12-12 59183-02 A
S
12.3.5
Rename a Profile
Enter the Profile Rename command to rename profile_1 as shown in the following
example:
SANbox #> admin start
SANbox (admin) #> callhome edit
SANbox (admin-callhome) #> profile rename profile_1 profile_4
The profile will be renamed. Please confirm (y/n): [n] y
SANbox (admin-callhome) #> callhome save
The CallHome database profiles will be saved and activated.
Please confirm (y/n): [n] y
12.3.6
Copy a Profile
Enter the Profile Copy command to copy profile_1 as shown in the following
example:
SANbox #> admin start
SANbox (admin) #> callhome edit
SANbox (admin-callhome) #> profile copy profile_1 profile_a
SANbox (admin-callhome) #> callhome save
The CallHome database profiles will be saved and activated.
Please confirm (y/n): [n] y
12.4
Testing a Call Home Profile
Enter the Callhome Test Profile command to test a Call Home profile as shown in
the following example. This command generates a test message and routes it to
the email recipients specified in the profile.
SANbox #> admin start
SANbox (admin) #> callhome test profile group4
A callhome profile test has been started.
A notification with the test result will appear
on the screen when the test has completed.
SANbox (admin) #>
Test for Callhome Profile group4 Passed.
To Next Page
Loading...
