1 – Introduction
New in This Release
59183-02 A 1-3
A
1.4
New in This Release
The following features are new in this release.
îš„ Call Home
îš„ Zoning Configuration Parameters
îš„ Set Port Command Changes
1.4.1
Call Home
This feature improves fabric availability by notifying adminstrators by email of
events that afffect switch operation. The following commands have been modified:
îš„ Set Setup Services
îš„ Show Setup Services
îš„ Set Log
îš„ Show Log
The following commands have been added:
îš„ Callhome
îš„ Profile
îš„ Set Setup Callhome
îš„ Show Setup Callhome
1.4.2
Zoning Configuration Parameters
The following zoning configuration parameters have changed:
îš„ InteropAutoSave is now named MergeAutoSave; function is the same.
îš„ DefaultZone values have changed from True/False to Allow/Deny; function
is the same.
1.4.3
Set Port Command Changes
The Set Port command keywords Bypass and Enable have been removed.
To Next Page
Loading...
Need help?
General
