8 – Connection Security Configuration
Displaying SSL and SSH Services
59183-02 A 8-3
A
8.2
Displaying SSL and SSH Services
Enter the Show Setup Services command to display the status of the SSH and
SSL services as shown in the following example:
SANbox #> show setup services
System Services
-----------------------------
TelnetEnabled True
SSHEnabled False
GUIMgmtEnabled True
SSLEnabled False
EmbeddedGUIEnabled True
SNMPEnabled True
NTPEnabled True
CIMEnabled True
FTPEnabled True
MgmtServerEnabled True
CallHomeEnabled True
8.3
Creating an SSL Security Certificate
Enabling SSL automatically creates a security certificate on the switch. The
security certificate is required to establish an SSL connection with a management
application such as Enterprise Fabric Suite 2007. The certificate is valid 24 hours
before the certificate creation date and expires 365 days after the creation date.
Should the original certificate become invalid, enter the Create Certificate
command to create a new one as shown in the following example:
SANbox (admin) #> create certificate
The current date and time is day mon date hh:mm:ss UTC yyyy.
This is the time used to stamp onto the certificate.
Is the date and time correct? (y/n): [n] y
Certificate generation successful.
To ensure the creation of a valid certificate, be sure that the switch and the
workstation time and date are the same. Refer to “Setting the Date and Time” on
page 5-17.
To Next Page
Loading...
Need help?
General
