5 – Switch Configuration
Displaying Switch Information
5-6 59183-02 A
S
5.1.4.2
Zoning Configuration Parameters
Enter the Show Config Zoning command to display zoning configuration
parameters. These parameters determine how zoning is applied to the switch.
Refer to Table 14-21 for a description of these parameters.
SANbox #> show config zoning
Configuration Name: default
-------------------
Zoning Configuration Information
--------------------------------
MergeAutoSave True
DefaultZone Allow
DiscardInactive False
5.1.4.3
Security Configuration Parameters
Enter the Show Config Security command to display security configuration and
port binding parameters. These parameters determine how security is applied to
the switch. Refer to Table 14-17 for a description of the switch security
configuration parameters. Refer to Table 14-18 for a description of the port binding
parameters.
SANbox #> show config security
Configuration Name: default
-------------------
Switch Security Configuration Information
-----------------------------------------
FabricBindingEnabled False
AutoSave True
Port Binding Status WWN
---- -------------- ---
0 Enabled 10:00:00:00:00:00:00:01
2 Disabled 10:00:00:00:00:00:00:01
5 Enabled 10:00:00:00:00:00:00:01
10:00:00:00:00:00:00:02
To Next Page
Loading...
Need help?
General
