12 – Call Home Configuration
Managing the Call Home Database
59183-02 A 12-7
A
The Admin End command releases the Admin session for other administrators
when you are done making changes to the switch.
To remove all Call Home profiles and restore the Call Home service configuration
to its factory state, enter the Reset Callhome command.
SANbox (admin) #> reset callhome
Managing the Call Home database consists of the following tasks:
îš„ Display Call Home Database Information
îš„ Create a Profile
îš„ Delete a Profile
îš„ Modify a Profile
îš„ Rename a Profile
îš„ Copy a Profile
12.3.1
Display Call Home Database Information
Enter the Callhome History command to display the Call Home data base change
history information as shown in the following example:
SANbox #> callhome history
CallHome Database History
-------------------------
ConfigurationLastEditedBy admin@OB-session2
ConfigurationLastEditedOn day mmm dd hh:mm:ss yyyy
DatabaseChecksum 000014a3
ProfileName group4
ProfileLevel Warn
ProcessedCount 286
ProcessedLast day mmm dd hh:mm:ss yyyy
ProfileName group5
ProfileLevel Alarm
ProcessedCount 25
ProcessedLast day mmm dd hh:mm:ss yyyy
Enter the Callhome List command to display a list of Call Home profiles as shown
in the following example:
SANbox #> callhome list
Configured Profiles:
--------------------
group4
group5
To Next Page
Loading...
Need help?
General
