Qlogic SANbox 5000 Series Interface Guide

14 – Command Reference
Show Config Port
59183-02 A 14-115
A
Show Config Port
Displays configuration parameters for one or more ports.
Authority None
Syntax show config port [port_number]
Keywords [port_number]
The number of the port. Ports are numbered beginning with 0. If you omit
[port_number], all ports are specified.
Examples The following is an example of the Show Config Port command for port 3:
SANbox #> show config port 3
Configuration Name: default
-----------------------------
Port Number: 3
------------
AdminState Offline
LinkSpeed Auto
PortType GL
SymbolicName Port3
ALFairness False
DeviceScanEnabled True
ForceOfflineRSCN False
ARB_FF False
InteropCredit 0
ExtCredit 0
FANEnabled True
AutoPerfTuning False
LCFEnabled False
MSEnabled True
NoClose False
IOStreamGuard Disabled
VIEnabled False
MFSEnabled True
PDISCPingEnable True

Qlogic SANbox 5000 Series Specifications

General

Brand	Qlogic
Model	SANbox 5000 Series
Category	Switch
Language	English