14 – Command Reference
Reset
14-62 59183-02 A
S
Enter the Show Setup System command to display system configuration
values.
Enter the Show Config Security command to display security configuration
values.
Table 14-14. System Configuration Defaults
Parameter Default
Ethernet Network Enable True
Ethernet Network Discovery Static
Ethernet Network IP Address 10.0.0.1
Ethernet Network IP Mask 255.0.0.0
Ethernet Gateway Address 10.0.0.254
Admin Timeout 30 minutes
InactivityTimeout 0
LocalLogEnabled True
RemotelogEnabled False
RemoteLogHostAddress 10.0.0.254
NTPClientEnabled False
NTPServerAddress 10.0.0.254
EmbeddedGUIEnabled True
Table 14-15. Security Configuration Defaults
Parameter Default
AutoSave True
FabricBindingEnabled False
PortBindingEnabled False
To Next Page
Loading...
Need help?
General
