Qlogic SANbox 5000 Series - Copy an Alias; Add Members to an Alias; Remove Members from an Alias

7 – Zoning Configuration
Managing Aliases
59183-02 A 7-21
A
7.9.4
Copy an Alias
Enter the Alias Copy command to copy alias_1 and its contents to alias_2 as
shown in the following example:
SANbox #> admin start
SANbox (admin) #> zoning edit
SANbox (admin-zoning) #> alias copy alias_1 alias_2
SANbox (admin-zoning) #> zoning save
7.9.5
Add Members to an Alias
Enter the Alias Add command to add ports/devices to alias_1 as shown in the
following example:
SANbox #> admin start
SANbox (admin) #> zoning edit
SANbox (admin-zoning) #> alias add alias_1 1,4 1,5
SANbox (admin-zoning) #> zoning save
7.9.6
Remove Members from an Alias
Enter the Alias Remove command to remove ports/devices from alias_1 as shown
in the following example:
SANbox #> admin start
SANbox (admin) #> zoning edit
SANbox (admin-zoning) #> alias remove alias_1 1,4 1,5
SANbox (admin-zoning) #> zoning save