5 – Switch Configuration
Managing Switch Feature Upgrades
5-24 59183-02 A
S
5. A message will prompt you to reset the switch to activate the firmware. Use
the Hotreset command to attempt a non-disruptive activation.
SANbox (admin) $> hotreset
5.8
Managing Switch Feature Upgrades
The following features are available to upgrade your switch through the purchase
and installation of a license key:
 Enterprise Fabric Suite 2007 is a workstation-based Java® application that
provides a graphical user interface for fabric management. This includes
Performance View which graphs port performance. Enterprise Fabric Suite
2007 comes with a free 30-day trial license.
îš„ Fabric Security provides for Secure Socket Layer (SSL) and Secure Shell
(SSH) connection security, device security using Challenge Handshake
Authentication Protocol (CHAP), and remote authentication using a Remote
Authentication Dial-In User Service (RADIUS) server.
îš„ SANdoctor provides tools for Fibre Channel connection verification (Fcping
command), Fibre Channel route tracing (Fctrace command), and transceiver
diagnostic information (Show Media command).
îš„ Port Activation enables additional Fibre Channel ports up to the 20-port
maximum.
Installing a feature license key is not disruptive, nor does it require a switch reset.
To order a license key, contact your switch distributor or your authorized reseller.
5.8.1
Display Feature Licenses
Enter the Feature Log command to display the license keys that are installed on
your switch as shown in the following example:
SANbox #> feature log
Mfg Feature Log:
----------------
Switch Licensed for 8 ports
Customer Feature Log:
---------------------
1) day month date 19:39:24 year - Switch Licensed for 20 ports
1-LCVXOWUNOJBE6
To Next Page
Loading...
Need help?
General
