10 – RADIUS Server Configuration
Displaying RADIUS Server Information
10-2 59183-02 A
S
10.1
Displaying RADIUS Server Information
Enter the Show Setup Radius command to display RADIUS server information as
shown in the following example. Refer to Table 14-23 for a description of the
RADIUS server configuration parameters.
SANbox #> show setup radius
Radius Information
------------------
DeviceAuthOrder RadiusLocal
UserAuthOrder RadiusLocal
TotalServers 1
Server: 1
ServerIPAddress 10.20.11.8
ServerUDPPort 1812
DeviceAuthServer False
UserAuthServer True
AccountingServer False
Timeout 2
Retries 0
SignPackets False
Secret ********
To Next Page
Loading...
