Qlogic SANbox 5000 Series - Switch Configuration Defaults

14 – Command Reference
Reset
14-56 59183-02 A
S
Enter the Show Config Switch command to display switch configuration
values.
Table 14-7. Switch Configuration Defaults
Parameter Default
Admin State Online
Broadcast Enabled True
InbandEnabled True
FDMIEnabled True
FDMIEntries 1000
DefaultDomain ID 1 (0x Hex)
Domain ID Lock False
Symbolic Name SANbox
R_A_TOV 10000
E_D_TOV 2000
Principal Priority 254
Configuration Description Config Default
InteropMode Standard