Qlogic SANbox 5000 Series Interface Guide

14 – Command Reference
Show Config Security
59183-02 A 14-117
A
Show Config Security
Displays the security database configuration parameters.
Authority None
Syntax show config security
Examples The following is an example of the Show Config Security command:
SANbox #> show config security
Configuration Name: default
-------------------
Switch Security Configuration Information
-----------------------------------------
FabricBindingEnabled False
AutoSave True
Port Binding Status WWN
---- -------------- ---
0 Enabled 10:00:00:00:00:00:00:01
2 Disabled 10:00:00:00:00:00:00:01
5 Enabled 10:00:00:00:00:00:00:01
10:00:00:00:00:00:00:02

Qlogic SANbox 5000 Series Specifications

General

Brand	Qlogic
Model	SANbox 5000 Series
Category	Switch
Language	English