Qlogic SANbox 5000 Series Interface Guide

14 – Command Reference
Show Config Security Portbinding
14-118 59183-02 A
S
Show Config Security Portbinding
Displays the port binding configuration for one or more ports.
Authority None
Syntax show config security portbinding [port_number]
Keywords [port_number]
The number of the port. If you omit [port_number], the port binding configuration
for all ports is displayed.
Examples The following is an example of the Show Config Security Port command:
SANbox #> show config security portbinding
Configuration Name: default
-------------------
Port Binding Status WWN
---- -------------- -----------------------
0 Enabled 10:20:30:40:50:60:70:80
1 Enabled 10:20:30:40:50:60:70:80
2 Disabled 10:20:30:40:50:60:70:80
3 Enabled 10:20:30:40:50:60:70:80
4 Enabled 10:20:30:40:50:60:70:80
5 Disabled 10:20:30:40:50:60:70:80
6 Enabled 10:20:30:40:50:60:70:81
7 Disabled 10:20:30:40:50:60:70:82
8 Enabled 10:20:30:40:50:60:70:80

Qlogic SANbox 5000 Series Specifications

General

Brand	Qlogic
Model	SANbox 5000 Series
Category	Switch
Language	English