Qlogic SANbox 5000 Series - Show Users

14 – Command Reference
Show Users
14-160 59183-02 A
S
Show Users
Displays a list of logged-in users. This is equivalent to the User List command.
Authority None
Syntax show users
Examples The following is an example of the Show Users command:
SANbox #> show users
User Ethernet Addr-Port Logged in Since
---- ------------------ ---------------
cim@OB-session1 cim Tue Jul 11 05:14:54 2006
admin@OB-session2 10.20.34.42-3720 Tue Jul 11 12:26:20 2006
admin@OB-session3 10.20.32.58-35794 Tue Jul 11 11:08:18 2006
snmp@IB-session4 Unknown Tue Jul 11 05:15:01 2006
snmp@OB-session5 Unknown Tue Jul 11 05:15:01 2006
admin@OB-session8 10.20.33.201 Tue Jul 11 09:55:36 2006
admin@OB-session11 10.20.34.42 Tue Jul 11 12:18:20 2006
admin@OB-session14 10.20.32.68 Tue Jul 11 13:00:40 2006
ms@OB-session16 Unknown Tue Jul 11 13:08:31 2006